Homepage  |  简体中文  |  繁体中文  
 
Solar Energy and Photovoltaic   -  Material
 
EVA Film for Solar Cell Encapsulation (EF)
Product Re-order No.: SS/PV/EF-1
Fast type: heating to 135 ℃ maintain 15-20 minutes at the temperature
Solidifying speed: fast type
Thickness:0.1 to 1.0, 0.5mm is in standard
Width:350, 540, 670, 810, 820, 980, 1000, up to 1650mm
Length:50-100 meter per roll 
Packing:roll in container
Note:The sizes of thickness and width shall be in accordance with the users’confirmation.
 

 
EVA Film for Solar Cell Encapsulation (EF)
Product Re-order No.: Re-Order No.SS/PV/EF-2
Standard type: heating to 145 ℃ maintain 30-40 minutes  at the temperature 
Solidifying speed: Standard type
Thickness:0.1 to 1.0, 0.5mm is in standard
Width:350, 540, 670, 810, 820, 980, 1000, up to 1650mm
Length:50-100 meter per roll
Packing:roll in container
Note: The sizes of thickness and width shall be in accordance with the users’ confirmation.
 

 
Background Film for Solar Cell Encapsulation (BF)
Product Re-order No.: SS/PV/BF-1
Index Parameter Index Parameter
Tensile Strength(N/10mm) ≥ 110 Dimensional stability ≤ 3
Elongation 120~130% Water Vapor Permeability ≤ 2.0
Tear Strength 135~145 N/mm Breakdown Voltage ≥ 17
Peel Strength of Layers ≥ 25 N/5cm Uv xenon light 100h Not changing color
Peel Strength of EVA Encapsulated ≥ 20 N/cm Life Over 20 years

Structure:TPT
Thickness(mm):0.18、0.23、0.35
Width (mm):1000
Packing:roll in container
Note: The sizes of thickness and width shall be in accordance with the users’ confirmation.
 

 
Background Film for Solar Cell Encapsulation (BF)
Product Re-order No.: SS/PV/BF-2
Index Parameter Index Parameter
Tensile Strength (N/10mm) ≥ 110 Dimensional stability ≤ 3
Elongation 120~130% Water Vapor Permeability ≤ 2.0
Tear Strength 135~145 N/mm Breakdown Voltage ≥ 17
Peel Strength of Layers ≥ 25 N/5cm Uv xenon light 100h Not changing color
Peel Strength of EVA Encapsulated ≥ 20 N/cm Life Over 20 years

Structure:TPE
Thickness(mm):0.18、0.23、0.35
Width (mm):1000
Packing:roll in container
Note: The sizes of thickness and width shall be in accordance with the users’ confirmation.
 

 
Solar cell of polycrystalline silicon (CP)
Product Re-order No.: SS/PV/CM-1
Dimension: 125×125±0.5mm
Diagonal: 150±1.0mm (round chamfers)
Thickness-Si: 220±20 μm
Front: blue silicon nitride antireflection coatings 1.5mm silver busbar
Back full: full surface aluminum back-surface field 3.5mm(silver / aluminum)soldering pads

Parameters
Model Efficiency(%) Power(Wp) Vm(V) Im(A) Voc(V) Isc(A)
CM125-17.3 17.3±0.1 2.57 0.511 5.12 0.620±5﹪ 5.24±5﹪
CM125-17.1 17.1±0.1 2.54 0.511 5.07 0.620±5﹪ 5.20±5﹪
CM125-16.9 16.9±0.1 2.51 0.509 4.98 0.619±5﹪ 5.18±5﹪
CM125-16.7 16.7±0.1 2.48 0.504 4.97 0.618±5﹪ 5.17±5﹪
CM125-16.5 16.5±0.1 2.45 0.503 4.86 0.618±5﹪ 5.15±5﹪
CM125-16.3 16.3±0.1 2.42 0.500 4.79 0.617±5﹪ 5.10±5﹪
CM125-16.1 16.1±0.1 2.39 0.500 4.66 0.615±5﹪ 5.06±5﹪
CM125-15.9 15.9±0.1 2.36 0.500 4.63 0.615±5﹪ 5.04±5﹪
CM125-15.7 15.7±0.1 2.33 0.500 4.56 0.613±5﹪ 5.03±5﹪
CM125-15.5 15.5±0.1 2.30 0.500 4.51 0.611±5﹪ 5.01±5﹪
CM125-15.3 15.3±0.1 2.27 0.498 4.47 0.610±5﹪ 4.97±5﹪
CM125-15.1 15.1±0.1 2.24 0.498 4.42 0.608±5﹪ 4.95±5﹪
CM125-14.9 14.9±0.1 2.21 0.490 4.35 0.607±5﹪ 4.93±5﹪
CM125-14.7 14.7±0.1 2.18 0.490 4.29 0.604±5﹪ 4.92±5﹪
CM125-14.5 14.5±0.1 2.15 0.490 4.23 0.602±5﹪ 4.91±5﹪
CM125-14.3 14.3±0.1 2.12 0.487 4.15 0.599±5﹪ 4.86±5﹪
CM125-14.1 14.1±0.1 2.09 0.487 4.10 0.598±5﹪ 4.83±5﹪
CM125-13.1 13.1±0.1 1.94 0.487 3.90 0.587±5﹪ 4.71±5﹪
CM125-12.1 12.1±0.1 1.79 0.480 3.58 0.580±5﹪ 4.65±5﹪
 

 
Solar cell of monocrystalline silicon (CM)
Product Re-order No.: SS/PV/CP-1
Dimension: 156×156±0.5mm
Diagonal: 202±1.0mm (straight chamfers)
Thickness-Si: 220±20 μ m
Front: blue silicon nitride antireflection coatings 2mm silver busbar
Back full: full surface aluminum back-surface field 4mm(silver / aluminum)soldering pads
Note: The sizes of thickness and width shall be in accordance with the users’ confirmation.

Parameters
Model Efficiency(%) Power(Wp) Vm(V) Im(A) Voc(V) Isc(A)
CP156-16.3 16.3±0.1 3.97 0.511 7.81 0.615±5% 8.34±5%
CP156-16.1 16.1±0.1 3.92 0.510 7.72 0.614±5% 8.26±5%
CP156-15.9 15.9±0.1 3.87 0.509 7.67 0.614±5% 8.20±5%
CP156-15.7 15.7±0.1 3.82 0.509 7.62 0.613±5% 8.15±5%
CP156-15.5 15.5±0.1 3.77 0.506 7.51 0.612±5% 8.10±5%
CP156-15.3 15.3±0.1 3.73 0.505 7.45 0.610±5% 8.06±5%
CP156-15.1 15.1±0.1 3.68 0.504 7.37 0.609±5% 8.01±5%
CP156-14.9 14.9±0.1 3.63 0.502 7.29 0.607±5% 7.96±5%
CP156-14.7 14.7±0.1 3.58 0.501 7.20 0.604±5% 7.80±5%
CP156-14.5 14.5±0.1 3.53 0.498 7.16 0.602±5% 7.72±5%
CP156-14.3 14.3±0.1 3.49 0.495 7.11 0.599±5% 7.65±5%
CP156-14.1 14.1±0.1 3.44 0.494 7.03 0.598±5% 7.51±5%
CP156-13.6 13.6±0.1 3.32 0.490 6.90 0.597±5% 7.38±5%
CP156-13.1 13.1±0.1 3.20 0.485 6.78 0.597±5% 7.27±5%
CP156-12.1 12.1±0.1 2.96 0.470 6.61 0.596±5% 7.12±5%
 

 
PV glass (GL)
Product Re-order No.: SS/PV/PG-1

Index

Parameter

Softening point

730℃

Annealing point

562℃

Strain point

510℃

Expansion Coefficient

9.08 X10-5

thermal conductivity at 20℃ in(watt/m2/K)

1.06

Hemispherical reflectivity (-18℃ – 66℃)

0.85

average sunlight transmission rate

92%


Structure: super white with low iron
Thickness(mm): 3.2、4.0、5.0
length (mm): 2134 Max
Width (mm): 1524 Max
Packing: wooden case in container
Note: The sizes of thickness , width and length shall be in accordance with the users’ confirmation.
 

 
PV glass (GL)
Product Re-order No.: SS/PV/PG-2

Index

Parameter

Softening point

730℃

Annealing point

562℃

Strain point

510℃

Expansion Coefficient

9.08 X10-5

thermal conductivity at 20℃ in(watt/m2/K)

1.06

Hemispherical reflectivity (-18℃ – 66℃)

0.85

average sunlight transmission rate

92%


Structure: tampered glass with mat
Thickness(mm): 3.2、4.0、5.0
length (mm): 1800 Max
Width (mm): 1200 Max
Packing: wooden case in container
Note: The sizes of thickness , width and length shall be in accordance with the users’ confirmation.
 

 
PV Soldering Ribbon (SR)
Product Re-order No.: SS/PV/SR-1
Thickness (mm):0.1 - 0.2
Width (mm):0.8 - 2
Packing:reel or spool in container
Note: The sizes of thickness , width,weight per reel or spool  and coating material  shall be in accordance with the users’ confirmation.
 

 
PV Soldering Ribbon (SR)
Product Re-order No.: SS/PV/SR-2
Thickness(mm): 0.1 - 0.2
Width (mm): 4 - 6
Packing: reel in container
Note: The sizes of thickness , width,weight per reel or spool  and coating material  shall be in accordance with the users’ confirmation.
 

 
Adhesive for solar module (AM)
Product Re-order No.: SS/PV/AM-1
Uncured Properties
Cure Speed(Fixture/Full)..................................15min./24 hrs. (2mm)
Gap-filling Ability (mm)............................................6.00
Specific Gravity(g/cm3)................................... 1.37±0.03
Flashpoint (℃) .......................................................... >93
Cured Properties
Operating Temperature Range(℃)..................-54 to 210
Hardness (Shore A)(GB/T 531-1999) ..........................40
Elongation at break (%)...............................................400
Tensile Strength (MPa) ...............................................1.9

Capacity:310mL
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.
 

 
Adhesive for solar module (AM)
Product Re-order No.: SS/PV/AM-2

Uncured Properties
Cure Speed(Fixture/Full)..................................15min./24 hrs. (2mm)
Gap-filling Ability (mm)............................................6.00
Specific Gravity(g/cm3)................................... 1.37±0.03
Flashpoint (℃) .......................................................... >93
Cured Properties
Operating Temperature Range(℃)..................-54 to 210
Hardness (Shore A)(GB/T 531-1999) ..........................40
Elongation at break (%)...............................................400
Tensile Strength (MPa) ...............................................1.9

Capacity:400mL
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.

 

 
Adhesive for solar module (AM)
Product Re-order No.: SS/PV/AM-3

Uncured Properties
Cure Speed(Fixture/Full)..................................15min./24 hrs. (2mm)
Gap-filling Ability (mm)............................................6.00
Specific Gravity(g/cm3)................................... 1.37±0.03
Flashpoint (℃) .......................................................... >93
Cured Properties
Operating Temperature Range(℃)..................-54 to 210
Hardness (Shore A)(GB/T 531-1999) ..........................40
Elongation at break (%)...............................................400
Tensile Strength (MPa) ...............................................1.9

Capacity:600mL
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.

 

 
Adhesive for solar module (AM)
Product Re-order No.: SS/PV/AM-4

Uncured Properties
Cure Speed(Fixture/Full)..................................15min./24 hrs. (2mm)
Gap-filling Ability (mm)............................................6.00
Specific Gravity(g/cm3)................................... 1.37±0.03
Flashpoint (℃) .......................................................... >93
Cured Properties
Operating Temperature Range(℃)..................-54 to 210
Hardness (Shore A)(GB/T 531-1999) ..........................40
Elongation at break (%)...............................................400
Tensile Strength (MPa) ...............................................1.9

Capacity:20L
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.

 

 
Pouring sealant for PV junction box (PS)
Product Re-order No.: SS/PV/PS-1

CURED PROPERTIES
Tensile strength(MPa)……………………………………0.5
Hardness (ShoreA) …………………………………………25
Operating Temperature Range.(℃)……………–60-220
Volume Resistivity(25℃ohm-cm)…………………4.2×1014
Thermal Conductive(W/m.℃) ………………………0.3
CTE (PPM/℃) ………………………………………… 200
Dielectric Constant(100KHz)……………………3.2

Capacity:8Kg
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.

 

 
Pouring sealant for PV junction box (PS)
Product Re-order No.: SS/PV/PS-2

CURED PROPERTIES
Tensile strength(MPa)……………………………………0.5
Hardness (ShoreA) …………………………………………25
Operating Temperature Range.(℃)……………–60-220
Volume Resistivity(25℃ohm-cm)…………………4.2×1014
Thermal Conductive(W/m.℃) ………………………0.3
CTE (PPM/℃) ………………………………………… 200
Dielectric Constant(100KHz)……………………3.2

Capacity:20L
Packing:Carton in container
Note: The sizes of Packing shall be in accordance with the users’ confirmation.

 

 

 
Edge frame (EF)
Product Re-order No.: SS/PV/EF-1
Section type: No. on right picture or buyer’s draft
Length: fixed length at buyer’s option
Packing:Carton on pallet in container
Note: The sizes of length and section shall be in accordance with the users’ confirmation.
 

 
Corner code (CC)
Product Re-order No.: SS/PV/CC-1
Size: matched with frame or buyer’s draft
Packing: wooden case in container
Note: The sizes of length and width shall be in accordance with the users’ confirmation.
 

 
Junction Box (JB)
Product Re-order No.: SS/PV/JB-1

insulated voltage:≤1000VDC
range of power:10-300W
connected resistance :≤5mΩ
diameter of cable :4mm2
grade of protection:IP65
temperature of application:-40℃~+85℃

type:Sealing by itself
Module power: 100W and down, 100-200W, 200 and up
Packing:Carton in container

Note:
1.The sizes of Packing shall be in accordance with the users’ confirmation.
2. Wp.,VM,IM  and type  should be listed in enquiry sheet for matching suitable products. 

 

 
Junction Box (JB)
Product Re-order No.: SS/PV/JB-2

insulated voltage:≤1000VDC
range of power:10-300W
connected resistance :≤5mΩ
diameter of cable :4mm2
grade of protection:IP65
temperature of application:-40℃~+85℃

type:Sealing by pouring sealant
Module power: 100W and down, 100-200W, 200 and up
Packing:Carton in container

Note:
1.The sizes of Packing shall be in accordance with the users’ confirmation.
2. Wp.,VM,IM  and type  should be listed in enquiry sheet for matching suitable products. 

 

New products & Hot sales  -  Enterprise Culture  -  Inquiry Sheet  -  Legal Statement  -  Version2006  -  简体中文
Copyright 1999 - 2021 京ICP备05047166号
SINOSI GROUP CORPORATION   SINO SURPLUS INTERNATIONAL LIMITED   SINOSI SCI-TECH BEIJING CO.,LTD.